T/C White Line Paint

SURFACE PREPARATION

Pavement surface must be cleaned entirely of dust, dirt, debris and all loose material. If using T/C White Line Paint on a new, uncoated surface, allow adequate curing time before application.

MIXING PROCEDURES

DO NOT DILUTE. STIR THOROUGHLY BEFORE USING.

APPLICATION

T/C White Line Paint can be rolled, brushed, or sprayed. To assure crisp lines, it is advisable to use tape to mask lines. Remove tape as soon as line paint has dried. T/C Line Paint can be modified to match the texture of the court surface by adding an 80 to 100 mesh silica sand.

IMPORTANT

Stir before using. Temperatures must be above 50 °F both during application and for a period of at least 24 hours after application. Do not apply if rain is imminent or forecast. Keep from freezing. Close container when not in use. On outdoor concrete surfaces, assure adequate and functional perimeter drains as well as a sound vapor barrier beneath the slab.

DRYING TIME

Thirty to sixty (30 to 60) minutes under optimum drying conditions. Indoor applications are substantially affected by temperature and available ventilation and will dry more slowly.

CLEAN UP

Wash tools in water before material dries.